Gathering up computer intermittently, or a clear reason for rebooting itself. I will make this as a valuable work that I was troublesome to do and it was lost.
If this happens once again, the chance to explain the cause is extremely far away. If you find it happening on a regular basis, it is clear to your interest to find and fix the problem.
There are a few things that you can inspect for yourself who may save a trip to the repair shop.
Most modern computer systems are equipped with circuit monitoring and computer. One of the checks built into the system is to test the operating temperature. The computer can shut down. Outside desirable operating range.
In order for your system to operate at the correct operating temperature, it is important that air circulates freely in the case and around the case. If a computer case is installed inside the enclosure, you must first consider the change. Likewise, books, manuals and documents covered by a computer can be issued. These are urgent again air circulation, these items should be eliminated. Please see grooved vents on the side of the case. These slots are responsible for static electricity by block accumulation of dust, always by computer, usually drawing power at all times. The computer is second only to a vacuum cleaner that sucks with dust and fluff.
Taking cover of case also shows the concentration of dust in the computer. Please be careful to remove accumulation of dust from internal parts. This is probably best done with a soft artist's brush or aerosol can of compressed air.
Next, let's look at the internal cooling fan. Modern computers usually have cooling fans seated on the processor. This fan should be clear of dust and free movement without computer friction noise when the computer is running. Be careful not to just thrust things into the various components, it is ok to start removing the removed case cover and the computer. Also, there is a cooling fan inside or it is connected to the power supply. It should be free again without dust again. Some computers are also additional fans. It is screwed onto the vent of the slot case and is usually run from the cable connected to the motherboard. Not all machines have fans in different cases, but if there is, that is a reason. Apply the same check to this fan.
Once you have identified a defect with your cooling fan, this may require travel to your local repair shop. Repair technicians may also suggest that the CPU heat remover is removed and placed back with a new heat transfer mixture which is a simple task for veteran repairers
0 comments:
Post a Comment